Sleeve applicators · Pro automatic

Bottle Neck Handle Applicator

Bottle neck handle applicator for inserting handles onto PET or HDPE bottle necks.

Enquire about this machine Back to machines

Machine overview

This handle applicator places and inserts handles on bottle necks for larger PET or HDPE containers. It can work with full or empty bottles and supports automation around larger pack handling requirements.

ThroughputAbout 1000–1200 bottles/hour depending on product size

Format rangeBottle height 100–500 mm

Utilities110V / 220V / 380V; 450 W

Specifications

Machine model	LU-YG18
Working speed	About 1000–1200 BPH
Suitable bottle height	100–500 mm
Conveyor height	1000 ± 100 mm
Machine weight	Approx. 300 kg
Power supply	110V / 220V / 380V; 450 W

Specify this machine

Check suitability against the real product

Final speed and configuration should be confirmed against product dimensions, film type, operator workflow, upstream equipment and downstream handling.

Request configuration advice

Model application review

Confirm LU-YG18 handle application from bottle geometry through downstream handling

The LU-YG18 page publishes a working-speed range, bottle-height range, conveyor height, approximate machine weight and power options. Handle, bottle and line suitability still requires physical samples and a controlled application trial.

Published data retained from this model page. Final suitability and configuration must be confirmed against representative products, film, site services and trials.
Published item	Value	How to use it
Machine model	LU-YG18	Use this exact reference when discussing configuration and support.
Working speed	About 1000–1200 bottles per hour	Confirm sustained accepted output with the real bottle, handle and infeed condition.
Suitable bottle height	100–500 mm	Check every profile and its stability, not height alone.
Conveyor height	1000 ± 100 mm	Compare with upstream and downstream conveyors and any required transfer.
Machine weight	Approx. 300 kg	Use for preliminary access and layout planning pending final configuration.
Power supply	110 V / 220 V / 380 V; 450 W	Confirm the supplied electrical configuration and site service before installation.

Prove handle and neck compatibility

Supply production handles and every bottle-neck profile. Check orientation, opening, seating, retention and any interference with cap, tamper feature or label.

Control bottle presentation

Define infeed spacing, orientation, stability and conveyor contact. Tall or light bottles may need specific guidance to remain controlled during application.

Verify the next operation

Confirm whether the handled bottle is labelled, packed, accumulated or manually lifted afterwards. The handle should remain correctly seated through normal downstream transfers.

Information required to confirm this application

Bottle material, height, diameter, neck and closure profile.
Handle material, dimensions, orientation and supplied tolerances.
Required handle position and retention check.
Line speed, spacing, conveyor height and direction.
Upstream/downstream machinery and accumulation.
Available services, footprint, access and changeover needs.

Application review

Confirm the machine against the real production duty

Send production bottles and handles, required position, infeed condition and downstream handling so the LU-YG18 can be assessed with the exact components.

Send samples and application data